Serving Austin & Surrounding Areas (512) 789-0000

Williamson County, TX

Concrete Foundations in Georgetown, TX

Slab foundations poured to code for new construction and additions.

Typical Cost in Georgetown

$5 – $10 per sq ft

Typical job: $8,000 – $30,000+ (1,200–2,500 sq ft residential slab)

Licensed & InsuredFree Written EstimateOwn Crew — No Subs5-Star Rated

Get Your Free Estimate

We respond within 24 hours. No pressure.

Licensed & Insured · No Obligation

About This Service

Concrete Foundations in Georgetown

Georgetown's Williamson County market includes both new construction subdivisions and older lots with renovation or addition potential. We pour foundations for new homes, ADUs, and additions throughout Georgetown, managing Williamson County permits and coordinating with engineers who understand the local soil conditions. Whether you're building from scratch or adding square footage to an existing home, we provide the same level of permit management and inspection coordination on every job.

A proper foundation is everything. We work with engineers and inspectors to pour post-tension and conventional slab foundations for residential and light commercial builds in Austin and surrounding areas.

Why Austin Premier Concrete

  • Licensed Texas contractor
  • General liability + workers' comp
  • Our own crew — no subcontractors
  • Free written estimates
  • Permit coordination included
  • Serving all Georgetown neighborhoods
Call (512) 789-0000

Pricing

How Much Does Concrete Foundations Cost in Georgetown?

Prices below reflect Central Texas market rates as of 2025. Actual quotes depend on site conditions, finish, and project scope. We provide free written estimates — no vague ballpark figures.

Base Price

$5 – $10

per sq ft

Typical Job Total

$8,000 – $30,000+

1,200–2,500 sq ft residential slab

What Affects Your Price

  • Slab type (conventional vs post-tension)
  • Pier depth and spacing required by engineer
  • Soil conditions and moisture barriers
  • City permit and inspection fees
  • Square footage and beam layout complexity

Money-saving tip

Having a soil report and engineer-stamped plans ready before requesting estimates speeds up the process and avoids costly scope changes mid-project.

How It Works

Our Concrete Foundations Process in Georgetown

We follow the same proven steps on every job — no shortcuts, no surprises.

  1. 1

    Engineering & Plan Review

    Every foundation starts with engineer-stamped plans that specify slab thickness, beam depth, pier layout, and reinforcement. We review the plans before bidding to ensure our quote reflects the actual scope.

  2. 2

    Permit Application

    We submit the permit application to your city's building department and coordinate the pre-pour inspection schedule. This step typically takes 5–15 business days depending on your city's backlog.

  3. 3

    Site Preparation & Forming

    The site is graded, the moisture barrier is laid, and forms are set to the exact dimensions on the plans. Pier holes are drilled to the required depth and filled before the slab pour.

  4. 4

    Rebar or Cable Layout

    Rebar grids or post-tension cables are laid per the engineer's specifications. This step is inspected by the city inspector before any concrete is poured — nothing is covered until it passes.

  5. 5

    Pour, Finish & Stress

    The slab is poured, screeded, and finished in a single operation. Post-tension cables are stressed 10–14 days after the pour reaches design strength. Final city inspection closes the permit.

Scope of Work

What's Included

  • Post-tension & conventional slabs
  • Engineer-stamped plans
  • City permit coordination
  • Inspected & code-compliant

Ready for a free estimate in Georgetown?

Get a written quote within 24–48 hours — no obligation.

Local Coverage

Concrete Foundations Across All of Georgetown

We serve every neighborhood in Georgetown for concrete foundations work — including Sun City, Teravista, Wolf Ranch, and more. No travel surcharge, no reduced scope. Same crew, same quality across all of Williamson County.

Sun CityTeravistaWolf RanchSerenadaGeorgetown Village+ All Georgetown area

Not sure if we cover your street? Call us at (512) 789-0000 — we'll confirm coverage instantly.

Common Questions

Concrete Foundations in Georgetown — FAQ

1

Do you pour slab foundations in Georgetown, TX?

Yes — we pour both conventional and post-tension slab foundations in Georgetown for new homes, additions, and accessory dwelling units. We work with engineers and coordinate city inspections throughout the process.

2

How much does a slab foundation cost in Georgetown?

Foundation costs in Georgetown vary significantly based on square footage, soil conditions, and engineering requirements. Residential slabs typically run $5–$10 per square foot. We provide detailed written estimates after reviewing your plans and inspecting the site.

3

Does Georgetown's expansive clay soil affect concrete foundations?

Yes. Georgetown has the same Central Texas clay soils that cause slab movement throughout the region. We account for this with proper moisture barriers, pier depth, and post-tension cable layouts — following engineer-stamped plans on every foundation pour.

4

Do you handle Georgetown city permits for foundation work?

Yes. We coordinate all permit applications and inspections with Georgetown building officials. You don't have to manage that process — we handle it from initial submittal through final inspection sign-off.

5

How long does it take to pour a slab foundation in Georgetown?

A typical residential slab in Georgetown takes 1–3 days to form and pour, but the full process — from excavation to final inspection — usually runs 2–4 weeks including engineer reviews, pre-pour inspection, and cure time. We'll provide a project-specific schedule at your estimate.

6

What's the difference between a post-tension and conventional slab in Georgetown?

Post-tension slabs use high-strength steel cables tensioned after the pour to resist the movement caused by Georgetown's expansive clay soils. Conventional slabs use rebar grids. Post-tension is increasingly required by engineers in Central Texas because it better handles soil shrink-swell cycles. We pour both and will follow whatever your engineer specifies.

7

What inspections are required for a foundation pour in Georgetown?

Georgetown typically requires a pre-pour inspection (verifying forms, rebar, and vapor barrier) and a final structural inspection. For post-tension slabs, a PT inspection may also be required. We schedule and coordinate all inspections — you don't need to track this separately.

More in Georgetown

More Concrete Services in Georgetown

We handle all types of concrete work in Georgetown. View all Georgetown services →